How to Flush the Brake System on a 2003 VW Jetta TDI

A brake bleeder (available at auto parts and Internet stores) is used to remove moisture, and expel contaminated brake fluid from the brake system. The brake fluid in a VW should be flushed every 24 months or two (2) years.

Step 1 – Drive the vehicle front wheels onto ramps (2)

Step 2 – Place the gear selector in “Park” or “1st Gear”.

Step 3 – Place wheel chocks behind the two (2) rear wheels.

Step 4 – Place an oil pan under the passenger-side rear wheel.

Step 5 – Engage the hood lever lever in the cabin compartment.

Step 6 – Raise the engine hood.

Step 7 – Remove the brake reservoir cap (Yellow) by turning counter-clockwise.

Step 8 – Fill the reservoir with fresh VW Dot 4 brake fluid to the fill line.

Step 9 – Fill the reservoir of the brake bleeder pump with fresh VW Dot 4 brake fluid.

Step 10– Attach the plastic tubing (from kit) to the ports of the brake bleeder.

Step 11 – Attach the adapter cap (Red) to the master cylinder reservoir by turning clockwise until tight.

Step 12 – Pump the handle of the brake bleeder pump to pressurize the brake system.

Step 13 – Pump the handle of the pump until a reading between 12 and 15psi is shown on the gauge of the pump.

Step 14 – Place an oil drain pan under the passenger-side rear wheel.

Step 15 – Position the body or use a creeper under the passenger-side rear wheel.

Step 16 – Place a piece of plastic tubing (from kit) on the brake bleeder fitting.

Step 17 – Using a 9mm box wrench, loosen the bleeder fitting by turning counter-clockwise. one (1) turn.

Step 18 – The pressure from the pump will force discolored and contaminated brake fluid to enter the drain pan.

Step 19 – When there are no noticeable air bubbles and the brake fluid turns “clear”, close the brake bleeder fitting.

Step 20 – Move the drain pan to the drivers-side rear wheel.

Step 21 – Repeat the steps above (14 through 19) on the drivers-side rear wheel.

Step 22 -Move the drain pan to the passenger-side front wheel.

Step 23 – Repeat the steps above (14 through 19) on the passenger-side front wheel.

Step 24 – Move the drain pan to the drivers-side front wheel.

Step 25 – Repeat the above steps (14 through 19) on the drivers-side front wheel.

Step 26 – Remove the drain pan, plastic tubing, and 9mm wrench from under the drivers-side front wheel.

Step 27 – Pour the contaminated brake fluid into a plastic container.for recycling.

Step 28 – Unscrew the adapter cap (Red) by turning counter-clockwise.

Step 29 – Attach the original brake reservoir cap (Yellow) by turning clockwise.

Step 30 – Remove the hoses to the brake bleeder and adapter and set pump aside.

Step 31 – Have an assistant apply pressure to the brake pedal and check for a firm pedal.

Step 32 – Check for fluid leaks at all four (4) wheels.

Step 33 – Close the engine hood.

Step 34 – Remove rear wheel chocks.

Step 35 – Back vehicle off ramps.

Step 36 – Road test vehicle.

Rearend Repair For Your Rear Wheel Drive Car and Truck

Rearend repair is a complex and tedious task best left to a qualified master of this craft! Truth, most mechanics today do not know how to repair differentials. They send these jobs out to a differential rebuilding shop. I know it sounds unbelievable, but for this job you require a specialist. Many factors go into securing a quiet and long lasting service job on a rear differential!

I will elaborate further, you will require premium parts Timken bearings National seals for an American made car or Koyo bearings and NAK seals for a Japanese make vehicle. Ring and pinion sets factory oem or original from the factory work best. Second best are the aftermarket such as Motive, Richmond, and US gear. Gear oil choice is a primary concern for gear life I recommend 85-140wtgear oil. Synthetic gear oil simply has insufficient cushion for the impact between the ring and pinion. Great for an engine but rearends need a thick like molasses gear oil! This will give you long life on your gear set in your rearend of your car!

Four wheel drive trucks racing applications normally do not come with a warranty! Its best if you go to a differential specialist to have your differential custom built for these applications. Always go to someone who does this work as a specialist. Most repair shops do this work one here and one there. You want someone who does this daily. Break in period is critical! no excessive speeds over 75mph for the first 500 miles and make sure your differential repair shop runs the differential in with no load! Meaning just let the rear wheels turn above the ground slightly above idle before the vehicle is driven. Thanks for reading!

Repair Windshield Cracks Before It’s Too Late!

Advantages of repairing a cracked windshield over replacing it and when to choose repair or replacement of the windshield. When something strikes your windshield several things can happen. Sometimes we get lucky and nothing happens and then there are those impacts that cause damage to the windshield. Star Breaks, Bulls-Eyes, and cracks of all sizes and configuration can occur and can quickly spread across the windshield. This is why these breaks should be looked at as soon as possible to decide if repair is in order.

Other questions, such as is the windshield pitted, badly sandblasted or frosted? How severe is the break, are the cracks or crack longer than twelve inches. Did the rock chip an area larger than a quarter or is their DE-lamination of a large area between the two layers of glass in the break. If the break is in the driver’s direct line of sight, directly in front of the driver above the steering wheel. If the damage in this area is over one square inch or roughly the size of a quarter or there are long cracks, a replacement must be considered.

Amazingly today many still don’t know about windshield crack repair and that it’s a valid choice. Considering today’s economy, windshield repair is going to save you time trouble and money. Having rock chips and cracks repaired soon after they occur will end the trouble, time and cost of replacement. Mobile windshield repair service is available where they come to you and repair your cracked windshield at your site and at your convenience saving you the time. Just enter mobile windshield chip or crack repair in your Google search.

Expediency of the repair will save you the time and trouble of having to replace the windshield due to further cracking from expansion due to the sun heating the cracked windshield while cool nights cause contraction of the cracks, these factors are constantly working on the cracks and expanding them. The expansion and contraction will quickly extend cracks rendering the windshield useless. Now throw in a car wash on a hot day with the windshields temperature at 130 degrees or higher, then add cold water to it and pop, you now have a cracked out windshield and replacement is the only option. Or on a cold day a little rain threw in and some late night freezing temperatures and you have another recipe brewing that will expand windshield cracks. After water enters a break and then freezes the water expands and so will the cracks. Sometimes just touching the break will expand cracks in the glass. There are several more scenarios that have the same result, windshield replacement; these sonorous are eliminated by repairing cracked windshields as soon as possible.

The money you save by timely repair of those cracked windshields is from $100.00 to more than $900.00 on some makes, models and year of the different cars and trucks. One of the most commonly asked questions is how much does it cost to repair a cracked windshield? The answer is the average cost to repair a star break or small crack in my windshield is from about $50.00 to $125.00 depending on the severity of the crack and the repair company you choose. Mobile windshield chip and crack repair will cost a little more due to fuel but will save you from having to wait for the repair. Instead of waiting around for the repair you could be shopping, working or relaxing at home. Average windshield chip and crack repair costs run like this, small crack or rock chip repair $50.00. Combination breaks and cracks less than six inches are $65.00 and $85.00 for cracks over six inches. How long will the repair take? All windshield breaks are different, some fill quickly while other breaks fill slowly depending on how tight the cracks are, repairs vary in time requirements but the average time required is one half hour to just under one hour depending on the severity of the break.

Quality windshield crack repairs will be stronger than the surrounding glass and is why company’s who do high-quality repairs will warranty their repairs. Repairing a cracked windshield retains the factory windshield and seal, eliminating a possible water leak or wind whistle that can occur with replacement. By retaining the secure factory installed windshield seal we know the passenger airbag that deploys off some windshields will hold providing proper cushioning for your passengers. Crack repair returns the safety and integrity of the windshield and that should give you peace of mind. Save time by calling a mobile windshield chip and crack repair company where they come to you and perform the repairs. Save the trouble of having your windshield replaced because of procrastination of the repair. Save money by timely repair of small windshield rock chips and cracks before they spread.

This is how windshield crack repair will save you time trouble and money.

What Makes V-Rock Custom Truck Wheels Such a Good Truck Wheel Brand

Get To Know More About The V-Rock Custom Wheels

Custom wheels can improve the appearance of a car, RV, truck or SUV, whilst creating it stylish and uniquely yours. For a number of automobiles, the unique wheels can be replicated with bigger wheels that will permit the installation of high performance wheels and tires. Once you have chosen a pair of wheels, you can select an appropriately complemented tire from a wide selection of off-road and custom wheels from different retail stores as well as online stores. When you will start finding out the perfect match for your luxury car, you will come across numerous brands. It is best advised to opt for the custom and off-road wheels manufactured by the V-Rock Company.

About the V-Rock

V-Rock is a wheel manufacturing company that constructs custom wheels for trucks. It is an off-road customized wheel brand advertised by Trade Union Inc, the main player in the aftermarket wheel industry. The Trade Union Company has begun with a solitary distribution center situated in Los Angeles in CA. It has now developed to construct above 600000 wheels for every year. The product facility of the company based in Nantong situated in China was certified and approved according to the norms of ISO or TS16949 in the year of 2006. In recent times, the service provider offers rims and wheels of top class quality under 5 separate brands that includes Verde, Black Ice, and Envy as well as V-Rock wheels.

Important things to know

When you are going to buy any types of custom wheels for your luxurious sedans, there are so many factors you need to consider. But weight is one of the most essential factors you have to take into account while making a decision to purchase definite wheels from this brand. This is particularly true for customized and off-roading enthusiasts that eventually seek for light weight wheels for enhancing the vehicle handling as well as its performance. As lightweight wheels and rims are somewhat costly, numerous off-road and 4×4 vehicle fans need to compromise on the quality on the basis of cost and opt for the heavy wheels made up of steel. The V-Rock Truck Custom Wheels alter the game that delivers the rims and wheels with the best strength and weight ratio at affordable rates. All wheels of this brand are constructed of a 356.2 aluminum alloy with the help of utilization of low pressure casting method for increasing the strength and durability of the wheel.

Sizes and finishes

The high level V-Rock custom wheels are available in a complete package with standard off-road design and style. You can get custom wheels of this brand in 17, 18 and 20 inches in sizes, a single piece wheels are provided in black, black and chrome machined finishes. If you are creating a mean all terrain truck or wish your HD regular driver appear more fashionable, V-Rock Truck Wheels are one of the perfect options for what you are seeking for. In fact, you will be astonished with the fascinating combination of high quality and style these wheels characterize. Give a try to these types of wheels for your vehicles today.